Loading... Please wait...




Categories


Our Newsletter


Re-Inking Your Stamp



Colop / Ideal & StampStore HT Series

1:/ 
Depress the stamp slightly as shown below and slide the inkpad out from the stamp
2:/ 
Add a few drops of stamp pad ink to the pad
and the depress the stamp slightly again and re-insert the pad back into the stamp

 

Use 5 to 10 drops for small to medium size stamps and 10 to 15 drops for larger sizes

Use standard stamp pad ink. Ultifast & Stampstore Model 850 ink is NOT suitable.

 

 

 

 

StampStore ST, DF Series & Ultimark Stamps

Remove the red handle by holding the base of the stamp and lift the handle off the stamp.
Then add the required amount of ink in drops to each well as shown on the bottom of your stamp.
Replace the handle. Allow the stamp to stand for 12 hours. Do not over ink or the stamp will leak ink.
If after 12 hours the imprint is still faint add a few more drops to each well and let stand again for 12 hours.

Use Only StampStore model 850 ink or Ultimark ink. The use of any other inks will ruin the stamp



 

 

 

UltiFast Stamps

Remove the black handle by holding the base of the stamp and lift the handle off the stamp.

 
Unscrew the caps (anti clockwise direction). Then add the required amo
unt of ink in drops to each well as shown on the bottom of your stamp. Replace the caps and handle. Allow the stamp to stand for 12 hours. Do not over ink or the stamp will leak ink. If after 12 hours the imprint is still faint add a few more drops to each well and let stand again for 12 hours.

Use only UltiFast Ink. The use of any other inks will ruin the stamp